Vario PA robot cells
Maximum flexibility and suitable for high workpiece weights
Ideal if pallets are generally used to transport the workpieces, this solution enables effortless handling without manual reloading into a magazine. In addition to high workpiece weights, a wide variety of set-up arrangements are possible. Various options for workpiece positioning or sensor-based storage detection.
The goal is additional spindle hours
Your workpieces + suitable magazine = maximum autonomous time
ROBOT CELLS VARIO CT
Transport of workpieces on trolleys
Analog variants possible as with the robot cells with pallets on the floor. Any trolley heights and dimensions can be realized.
Technical data VARIO PA / VARIO CT
| Vario PA | Vario CT | |
|---|---|---|
| max. payload robot [kg] | 50 / 88 / 180 | 50 / 88 / 180 |
| max. workpiece weight 2x [kg] | 15 / 30 / 50 | 15 / 30 / 50 |
| Magazine | PA pallet | CT trolley |
| max. magazine area [m²] | 3,84 | 3,84 |
| Unmanned time [h] * | 30 | 30 |
| Lining parts | ●●● | ●●● |
| Shaft parts | ●●● | ●●● |
| Cubic parts | ●●● | ●●● |
| Saw cuts | ●●● | ●●● |
| Castings | ●●○ | ●●○ |
| for lathe |  | |
| for machining center | | |
| Basic software | | |
| Software Advanced | ||
| Single Batch | | |
| Multi Batch | ||
| Onepanel | | |
*) max. unmanned time in hours for parts 100x100mm and milling time 10min
Automated machines with PROMRO robot cells
Simple conversion
The smaller the batch sizes become, the more important a very quick and simple changeover is. The changeover of the robot cell for a new part consists of:
Retooling gripper & magazine
Preferably, the magazine is designed in such a way that no retooling is necessary. The gripper is designed so that the necessary gripper fingers can be adjusted or changed quickly and easily.
Operation - Software
Creating the sequence program for a new workpiece should only take a few minutes. It must also be simple so that employees feel safe. We offer several suitable user interfaces for this purpose.
Part positioning
Storage on grid or non-aligned parts
Two positioning alternatives are available, each with advantages and disadvantages. Alignment of the raw parts in a defined grid. Or, alternatively, automatic optical storage detection of the non-positioned unfinished parts on the pallet.
